Integrated hood with G2 Vent
An integrated plush lined hood adds extra warmth and comfort. Our one-way G2 vent at the top of the hood allows trapped air to escape but keeps water out.
3D silicone mask grip
A moulded grip on the back of the hood keeps your mask securely in place.
Non-slip shoulder protection
A printed rubber shoulder grip helps to keep your BCD in place and prevents wear from the BCD shoulder straps and inflator hold down.
Internal neck dam
The internal neck dam reduces water entry throughthe zip and provides an extra layer of thermal protection around the upperchest.
Water resistant seams
Our wetsuit seams are first glued and then stitched to provide maximum water resistance, comfort and durability.
Reinforced Seams
All of the intersecting seams on the inside of the wetsuit are covered by a heat-welded tape dot that relieves stress on the seam during use and prevents the stitching from over-stretching.
Liquid fusion seams
To further enhance the prevention of water entry through the seams, we apply a liquid rubber seal along the outside of each glued and stitched seam. Not only will this help to keep you warmer, it’s a more durable method of construction.
Extra warmth on vital areas
Our quick drying plush lining on the hood and torso retains heat around your core and head, where you need it most.
Internal cuff seals
A good wetsuit keeps the water where it belongs! Nobody needs a wetsuit that flushes each time you move. While other manufacturers use an uncomfortable silicone grip that snags on your skin to keep water out, we use a soft smoothskin neoprene seal on all the suit cuffs to prevent unnecessary flushing, without restricting flexibility.
Instrument grip
A silicone printed grip ensures your dive computer stays in place throughout the dive.
Fused cuffs
Cheaper wetsuits finish the cuff by either leaving the neoprene raw, which affects the durability of the suit but allows for stretch, or they bind the cuff, which protects the edges but reduces the stretch when you’re putting it on.We fuse our cuffs which provides maximum durability without losing any flexibility.
Large pockets
Securely carry all of your spares and accessories in the drysuit style pockets. Clip everything off on the internal bungee, safe in the knowledge nothing will drop out when you grab your wetnotes or VX1.
Integrated pocket zip
The pocket flap has an easy access zip to carry small spares and accessories, perfect for stashing your Luna Mini.
Rigid pocket bar
A rigid bar sewn into the pocket flap makes the pocket easy to open, even while wearing gloves.
Powertex knee pads
Abrasion resistant panels on the knees add durability without compromising movement.

There’s more to a high-end wetsuit than meets the eye.

Yes it’s about high quality neoprene, comfort and warmth. But it’s also about the small details that make your dive that little bit better.

There’s more to a high-end wetsuit than meets the eye.

Yes it’s about high quality neoprene, comfort and warmth. But it’s also about the small details that make your dive that little bit better.

Features

Double-Lined Stretch Neoprene

Limestone neoprene provides superior stretch and comfort, and is kinder to the environment too.

Integrated Hood with G2 Vent

An integrated plush lined hood adds extra warmth and comfort. Our one-way G2 vent at the top of the hood allows trapped air to escape but keeps water out.

3D Silicone Mask Grip

A moulded grip on the back of the hood keeps your mask securely in place.

Non-slip Shoulder Protection

A printed rubber shoulder grip helps to keep your BCD in place and prevents wear from the BCD shoulder straps and inflator hold down.

Instrument

Grip

A silicone printed grip ensures your dive computer stays in place throughout the dive.

Extra warmth on vital areas

Our quick drying plush lining on the hood and torso retains heat around your core and head, where you need it most.

Instrument

Grip

A silicone printed grip ensures your dive computer stays in place throughout the dive.

Extra warmth on vital areas

Our quick drying plush lining on the hood and torso retains heat around your core and head, where you need it most.

FUSED

CUFFS

Cheaper wetsuits finish the cuff by either leaving the neoprene raw, which affects the durability of the suit but allows for stretch, or they bind the cuff, which protects the edges but reduces the stretch when you’re putting it on.

We fuse our cuffs which provides maximum durability without losing any flexibility.

Fused Cuffs

Cheaper wetsuits finish the cuff by either leaving the neoprene raw, which affects the durability of the suit but allows for stretch, or they bind the cuff, which protects the edges but reduces the stretch when you’re putting it on.

We fuse our cuffs which provides maximum durability without losing any flexibility.

Water

Resistant

Seams

Our wetsuit seams are first glued and then stitched to provide maximum water resistance, comfort and durability.

Reinforced Seams

All of the intersecting seams on the inside of the wetsuit are covered by a heat-welded tape dot that relieves stress on the seam during use and prevents the stitching from over-stretching.

Liquid Fusion Seams

To further enhance the prevention of water entry through the seams, we apply a liquid rubber seal along the outside of each glued and stitched seam. Not only will this help to keep you warmer, it’s a more durable method of construction.

Internal Neck Dam

The internal neck dam reduces water entry through the zip and provides an extra layer of thermal protection around the upper chest.

Internal Cuff Seals

A good wetsuit keeps the water where it belongs! Nobody needs a wetsuit that flushes each time you move. While other manufacturers use an uncomfortable silicone grip that snags on your skin to keep water out, we use a soft smoothskin neoprene seal on all the suit cuffs to prevent unnecessary flushing, without restricting flexibility.

Powertex Knee Pads

Abrasion resistant panels on the knees add durability without compromising movement.

Large

Pockets

Securely carry all of your spares and accessories in the drysuit style pockets. Clip everything off on the internal bungee, safe in the knowledge nothing will drop out when you grab your wetnotes or VX1.

INTEGRATED POCKET ZIP

The pocket flap has an easy access zip to carry small spares and accessories, perfect for stashing your Luna Mini.

RIGID POCKET BAR

A rigid bar sewn into the pocket flap makes the pocket easy to open, even while wearing gloves.

';